Attacking Castles!

After building so many castles... ...we finally got around to siege weapons. My boys had been playing for years with a toy castle that has a Battering Ram, a Siege Tower, a catapult, but we took another look at them.


Siege Towers were usually a tall, rectangular construction with four wheels and a height roughly equal to that of the wall or sometimes higher. Near the top of the Siege Tower was a strategically placed drawbridge which was lowered to allow the attackers to race onto the battlements.

Battering Rams are one of the oldest types of siege engines, having been in use since Ancient times. The purpose of the battering ram was to smash, repeatedly, into the enemy's fortifications allowing the besiegers to directly attack the enemy once the wall or gate had been broken through. Some rams were as simple as several men and a log. Others were more sophisticated, having a massive ram suspended from a structure, with wheels for mobility.

The Trebuchet works by using the energy of a raised counterweight to throw the projectile. Initially, the sling, which has a pouch containing the projectile, is placed in a trough below the axle, which supports the beam. Upon releasing the trigger, the sling and the beam swing around toward the vertical position, where one end of the sling releases, opening the pouch and propelling the projectile towards the target.

Catapults were used as a key siege weapon against castles and fortified walled cities. As well as attempting to breach the walls, incendiary missiles could be thrown inside. We had made some before with mousetraps, but I thought it was time to make some new ones. (You can even sneak in a lesson on the physics of it, if you want to.)
This catapult is made from a spring-style clothespin, a craft stick, a small scrap of wood and a cap. Any small, shallow cap would probably work. You will also need some sort of glue. I found a glue gun glued solidly and quickly, which is better for the anxious little boys waiting to play. Glue the clothespin to one end of the scrap of wood.
Glue the craft stick to the top of the clothespin.
Glue the plastic cap, hollow side up, near the end of the craft stick, but not right at the end as you will need to leave a little room for fingers to press it down.
Wait a moment until the glue is dry.
Place a pompom (or two or three) or a marshmallow into the cap. Push down on the craft stick...
...and let go!

My boys played for quite a long time with them.

I am sure they will dig out the plastic knights and the castle or make some of their own in order to use their siege engine for more history play.

(Lady Chadwick's blog has some versions that they have made through an interesting experimental process.)

Popular Posts